Internet Protocol Television (IPTV) uses Internet technology to send television programming to your TV. IPTV uses a broadband Internet connection for top international programming directly to your home without a satellite dish. Just connect your receiver to your IPTV Internet from the house and on your TV, then sit back and enjoy

To install and use the IPTV, you need the following: High-speed Internet connection (recommended or higher) at least 4.0 Mbps. A functioning Smart TV. The recipient of the IPTV us.

Please use speed test server below to test your internet connection, Do this few times through the day. This will give you a good idea of overall internet speed available to you. A stable 12.0 Mbps is the minimum requirement. http://www.speedtest.net/

First, please check your network connection, reboot your router and device, and then try again. Secondly, if your network connection is no problem, please check whether your account is used on other devices. as you can view from more than 1 device at the same time.

Yes. Our service is available worldwide to everyone. 

• Paypal account
• Wise account
• payoneer account
• Digital Currencies 
• Others

Please pay attention that 1 subscription can be used on multiple devices but you can watch only on 1 device at the same time.
– Check if you entered your activation details correctly. – Check your network connection, reboot your router and device, and then try again. – If you have PC/Laptop, etc. connected to same internet network check if you are not overloading your network with downloading or watching movies, etc… on these devices. – Your Internet needs to be minimum b Mbit Download and 1 Mbit upload speed. – Reboot your devices and wait for 30 sec before turning them back on (STBs, Android Boxes, Routers, Cable modems) – Make sure you are connecting using a LAN (Ethernet) cable to devices and not via Wifi. – If your network connection is no problem, please check whether your account is used on other devices. – Please visit www.whatismyip.com by using a computer, and send us IP Address you see displayed for restoration. – Check if the device/app/program got the latest software and firmware updates. – Check the download speed on the actual device that is streaming our service, you may have 50mbs on your computer, but the device could be considerably slower, indicating a problem on your internal network. – Check for any high processor demanding applications running in the background that can be stopped, this is very important for low-end devices. – Check if your ISP having problems in your area, an excellent site to check this is downdetector.co.uk – Try uninstalling and reinstalling your app/program, your activation will not be lost.

We strive to provide you with a high level of service at very discounted rates. So please keep this in mind first and foremost. If a channel is down, we will do our best to restore that back to service. Please use the guidelines below before reporting a channel: – Stop and give it a couple of minutes. We reboot and swap channels when needed. The channel may be coming back. – Is this happening on all channels? If it is, you need to check on your end. – Reboot your devices and wait for 30 secs before turning them back on (STBs, Android Boxes, Routers, Cable modems) – Make sure you are connecting using a LAN (Ethernet) cable to devices and not via Wifi.

Sometimes you may experience buffering due to low internet speed or high internet traffic. Cause: The most common cause of buffering is the result of slow internet connection. This may be because of low internet speed or other users hogging the bandwidth in your house. Do you have lots of users in your home? Disconnect them all and try again The second reason is that you are using Wi-Fi, which is not suited for watching TV as you need direct (LAN) connection to internet network in order to enjoy smooth watching without interruptions. Resolution: Directly connect to your router using a LAN (ethernet) cable or to a powerline adaptor. If not possible, try moving the box closer to the router. Change your WI-FI channel. To avoid interference with nearby devices. If you experience buffering press “pause” for 10-15 seconds and resume, most of the time that will eliminate the need to buffer.